NET 1 series

Wiegand Splitter Convertor Nundnet NU WG 102

Nundnet NU WG 102 is Wiegand Splitter Convertor for access control to connect two readers to one wiegand port, as this convertor splits the input thereby allowing two readers to get connected. This way two readers can be used at different entrances hence reducing the rush at entry.

FEATURES
· Two readers for one port	· Auto wiegand detection (WG26~80)
· Corrosion free contacts	· IP 44 rated
· Expandable & interoperable	· 30mA current
· Relative humidity 90%	· 9~24VDC
· EN50131-1 Security Grade 2,	· Environmental Class II
. PCB/ Housing	. CE, RoHS, WEE

PROXIMITY, PIN CARD READER
Slim design
Specially sealed with no screw visible
Fireproof material casing using poly-carbonate
LED indicators for operation
2 x 6 pattern keypad
12 stainless steel buttons for keypad
Door bell incorporated
Frequency supported 125KHz / 13.56MHz
Reading distance 5 cm/ 10 cm based on frequency
Wiegand port 26bit, 34bit
PROXIMITY CARD READER
Slim design
Specially sealed with no screw visible
Fireproof material casing using poly-Carbonate
LED indicators for operation
Frequency supported 125KHz/ 13.56MHz
Reading distance 5 cm/ 10 cm based on frequency
Wiegand port 26bit, 34bit
PROXIMITY, PIN CARD READER
Slim design
Specially sealed with no screw visible
Fireproof material casing using poly-carbonate
LED indicators for operation
3 x 4 pattern keypad
12 stainless steel buttons for keypad
Frequency supported 125KHz / 13.56MHz
Reading distance 5cm/ 10cm based on frequency
Wiegand port 26bit, 34bit

PROXIMITY CARD READER NT 211PR

Proximity card reader, NT 211PR is a slim & an elegant design, hermitically packed with no screws visible, available as surface mount, constructed using very tough casing using fire resistant material poly-carbonate . Practically, suitable for any location from indoor to outdoor application owing to ingress protection rating IP56. This proximity card reader is available in two reading frequencies of EM low frequency standard 125KHz & Mifare standard high frequency 13.56MHz and the device provides Wiegand output of 26 or 34 bit signals hence compatible with similar de facto controllers The power consumption is little as 90mA in standby mode whiles 120mA inactive mode. LED indicators are incorporated for the status display.

FEATURES
· Elegant & slim design	· Wiegand 26, 34 output
· Supports EM 125KHz / Mifare 13.56MHz	· Poly Vinyl Chloride housing
· Read range EM : 5 ~10cm, Mifare : 2~5cm	· LED status display
· IP56 rated	· Black/ White color (option)