LONG RANGE UHF READER COMMUNICATION PORTS
Long range UHF readers are designed for specific as well as generic applications. It may range from highly secure military installation to generic car parking application where a long range UHF reader is integrated with the Gate barrier system. Applications decide the communication ports otherwise all ports are not used in one application. The major
- Published in Access Controls, UHF readers
Turnstile for bus
Turnstiles are security gates & are integrated with access control panels to keep every entry and exit recorded. The entry can be made possible using any suitable method as per management policy be it the proximity card, face, bar code or NFC etc. In the modern age, the transport owners grant entry to passengers using
- Published in Access Controls, Technology
Mirror polished turnstile housing
Mirror polished turnstile housing is used when asthetics & anti corrosion application is basic requirement. Stainless steel for turnstiles are used in standard form & universally acceptable grades are SUS304 while as SUS316 is sometimes used for specific projects based on demand & requirements. The standards are in correlation with ASTM (American Society for Testing
- Published in Access Controls, Nundnet News Desk, Technology, Turnstiles, UHF readers
UHF ULTRA HIGH FREQUENCY
UHF Reader, UHF is an acronym for Ultra High Frequency with the frequency range of 300–3,000 MHz (0.3 to 1 GHz) at the wavelength of 1~ 0.1m of the spectrum. UHF waves are very weak in nature, hence easily reflected by the ionized layer of the upper atmosphere but can be concentrated in highly directional
- Published in Access Controls, UHF readers
ANTI TAIL GATING OR PIGY BACKING FUNCTION
Anti Tailgating is to be used as feature for eliminating certain crimes. An unauthorized entry of the person to any location with aid of the authorised person or by illicit method is called as tailgating. As a rule of thumb, only one person is allowed to enter the site using authorization code which can be
- Published in Access Controls, Turnstiles
TNC Threaded Navy Connector
TNC, sometimes called as Threaded Navy Connector and named as Threaded Neil Concelman after two scientists. The interface specifications for these connectors and many other connectors are referenced in MIL-STD-348. Military wire standards are unique in its case as this is one established wiring products standard with its own designation. If compared with the UL
- Published in Turnstiles
COIN OPERATED TURNSTILES
Coin Operated Turnstiles are the best needed equipment where revenue generation and access control works in tandem. Coin Operated Turnstiles use the coin interceptor instead of reader. Turnstile is essentially an access control. It helps in to control entry and exit at the desired locations and due to this reason we call turnstiles as pedestrian
- Published in Access Controls, Technology, Turnstiles
FACILITY CODE
Facility code is also called as Site code, is a specific code that restricts or isolates other systems that might have a similar range of Badge ID’s access to specific site. Consider the two sites belonging to same facility, and as a general standard, cards can be of any format but bit width is limited to
- Published in Access Controls, Technology
REQUEST TO EXIT
REQUEST TO EXIT ( R.E.T / R.EX)The basic purpose of the access control is to secure the site. The types of access control varies from site to site as required, some sites are justan entry-exit control while as others can be entry, exit and monitor. Sometimes called as R.EX, alternately R.T.E is the signal that informs
- Published in Access Controls, Technology, Turnstiles
RELAY In general, a relay is an electrically operated switch based on the magnetic or semiconductor or combination of both. Most of the relays operate the switches mechanically using an electromagnetic energy, while as the semiconductors are used for operations of the in solid-state relays. Relays are the building blocks for access controls and various security products and projects,
- Published in Access Controls