CODE: Nundnet NT 910 PX

  • Built-in antenna with gain of 8 dBi
  • Built-in RF Module 27.9 dBm adjustable
  • Frequency range’s 922 ~ 928MHz, 902 ~ 928MHz, 865 ~ 868MHz,
  • IP X6 ingress protection rating
  • Wiegand, RS 485 serial communication
  • Compliant with EPC Gen II (ISO 18000-6C)
  • Ideal sensing range *~10M


Operating FrequencyA 902 ~ 928 MHz.
B 865 ~ 868 MHz.
C 922 ~ 928 MHz.
ModulationPR-ASK, ASK
CommunicationRS 485, Wiegand
Supported transpondersEPC Gen 2 ( ISO 18000 – 6C)
Reading range*~<10 Meters
Transmission power27.9 dBm ( adjustable)
Receiver sensitivity-85 dBm
Antenna gain8 dBi
HousingCover ABS ( Acrylonitrile
Butadiene Styrene )
MountingWall, Surface
Weight1.8Kg (1800grams)
Operating Voltage12 V
Current< 1 A
Ingress ProtectionIP X6
TemperatureOperating -20°C ~ 55°C,
Storage -20°C ~ 85°C
Relative humidity5~ 90%
Dimensions (mm)228 x 228 x 52.3(LxWxH)
CertificationsFCC, CE, RoHS


Nundnet NT 910 PXMid range UHF RFID reader 10M, IP X6 rated
XA :  902 ~ 928 MHz., B : 865 ~ 868 MHz., C : 922 ~ 928 MHz.

UHF Reader10M UHF ReaderNT 910 PX Specifications User manual

Additional information


Nundnet NT 910P is developed & designed for easy integration into existing digital & electronic management systems in the industry, viz.a.viz access controls, car parking & vehicle access control, retail & property management, ID access control for offices and private buildings, hand-free operation. The communication interfaces are RS485 for serial communication, open standard industrial protocol wiegand and other protocols.


Nundnet NT 910P uses Amplitude Shift keying (ASK), that represents the digital data as variations in the amplitude of a carrier wave. Here the binary symbol 1 is represented by transmitting a fixed amplitude carrier wave & fixed frequency for a bit duration of T seconds. If the signal value is 1 then the carrier signal will be transmitted; otherwise, a signal value of 0 will be transmitted. This is the most sophisticated scheme of modulation which represent the data in groups using an additional amplitude levels.

ISO 18000-6C

It defines air interface parameters for tags operating within the frequency range of 860–960 MHz and allows for use of different frequencies in different regions from within this range. Nundnet NT 910 P offers frequency range of 902~ 928MHz, 865~ 868MHz, 922 ~ 928MHz.


NT 910P enclosure can be subjected to a jet of water from a nozzle of 12.5 mm diameter at a distance of 2.5 ~3 M. The water flow rate can be 100 l/ min applied for a time of 1 min
/m², with a minimum of 3 minutes. Hence IP X6 rating means that water cannot penetrate into the device in such a quantity or in such a position that can prove risky for the operation of
unit. The IP X6 rating insures that the device can be used for outdoor applications like car parking, gate access etc.


Nundnet NT 910P are designed to sense Gen2 EPC global are multi frequency 860 ~ 960 MHz. Ultra High Frequency (UHF) passive RFID Tags, and an ideal sensing range unto 10 Meters.


Nundnet NT 910P equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Products in same series…