10M UHF long range reader
CODE: Nundnet NT 910 PX
UHF RFID long range reader, NT 910 PX is designed to sense the EPC Gen II (ISO 18000-6C) tags & cards at the distance of 10 Meters under ideal conditions. The built in antenna gain at 8dBi and RF module with 27.9dB makes it suitable for mid range sensing of compatible tags and cards. Being IPX6 rated, the device is capable to withstand the environmental changes as it fully protected against dust and low pressure jets of water from all directions with limited ingress permitted. The compatible frequency ranges are 922 ~ 928MHz, 902 ~ 928MHz, 865 ~ 868MHz. The device includes multiple communication ports in hardware as TCP/IP port, Wiegand (Universal communication port), RS232, & RS485. NT 910PX UHF RFID reader is compatible with Nundprox U series of cards & tags.
|Operating Frequency||A 902 ~ 928 MHz|
|B 865 ~ 868 MHz|
|C 922 ~ 928 MHz|
|Communication||RS 485, Wiegand, TCP/IP|
|Supported transponders||EPC Gen 2 ( ISO 18000 – 6C)|
|Reading range*||~<10 Meters|
|Transmission power||27.9 dBm ( adjustable)|
|Receiver sensitivity||-85 dBm|
|Antenna gain||8 dBi|
|Housing||Cover ABS ( Acrylonitrile|
|Butadiene Styrene )|
|Operating Voltage||12 V|
|Current||< 1 A|
|Ingress Protection||IP X6|
|Temperature||Operating -20°C ~ 55°C,|
|Storage -20°C ~ 85°C|
|Relative humidity||5~ 90%|
|Dimensions (mm)||228 x 228 x 52.3(LxWxH)|
|Certiﬁcations||FCC, CE, RoHS|
|Nundnet NT 910 PX||10M UHF Long range RFID reader, IP X6 rated|
|X||A : 902 ~ 928 MHz, B : 865 ~ 868 MHz, C : 922 ~ 928 MHz|
|UHF Reader||10M UHF Reader||NT 910 PX||Specifications||User manual|
Nundnet NT 910P is developed & designed for easy integration into existing digital & electronic management systems in the industry, viz.a.viz access controls, car parking & vehicle access control, retail & property management, ID access control for oﬃces and private buildings, hand-free operation. The communication interfaces are RS485 for serial communication, open standard industrial protocol wiegand and other protocols.
Nundnet NT 910P uses Amplitude Shift keying (ASK), that represents the digital data as variations in the amplitude of a carrier wave. Here the binary symbol 1 is represented by transmitting a ﬁxed amplitude carrier wave & ﬁxed frequency for a bit duration of T seconds. If the signal value is 1 then the carrier signal will be transmitted; otherwise, a signal value of 0 will be transmitted. This is the most sophisticated scheme of modulation which represent the data in groups using an additional amplitude levels.
It deﬁnes air interface parameters for tags operating within the frequency range of 860–960 MHz and allows for use of diﬀerent frequencies in diﬀerent regions from within this range. Nundnet NT 910 P oﬀers frequency range of 902~ 928MHz, 865~ 868MHz, 922 ~ 928MHz.
NT 910P enclosure can be subjected to a jet of water from a nozzle of 12.5 mm diameter at a distance of 2.5 ~3 M. The water ﬂow rate can be 100 l/ min applied for a time of 1 min
Nundnet NT 910P are designed to sense Gen2 EPC global are multi frequency 860 ~ 960 MHz. Ultra High Frequency (UHF) passive RFID Tags, and an ideal sensing range unto 10 Meters.
Nundnet NT 910P equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.