Butterfly Shaped Tripod Turnstile NU 1334 XET

CODE: Nundnet NU 1334 XET

  • Butterfly Shaped Tripod Turnstile
  • Full-Automatic, Semi-Automatic
  • 304 SUS Stainless steel material
  • Single button press activation
  • LED direction arrow plate 
  • Swipe card memory function 
  • Mechanism with shock absorption and anti-reverse
  • Pass through timeout of 10 seconds after card swipe
  • Re-use duration of same card user set from 1~60sec
  • Power failure automatic opening
  • Regain power automatic set operation

MATERIAL 
Housing MaterialSUS 304 stainless steel steel outer body & arms
ELECTRICAL 
Operating VoltageAC220V/ 50Hertz ±10%, AC110V/ 60Hertz ±10% (Optional on basis of customization)
Motor24V DC brush motor constructed with wound rotors and magnet stators
METRICS 
Standard SizeL1200 x W280 x H980(mm)
Arm Length500 ~ 550mm as per standard norms
OPERATION 
Startup after Power (ON)3 sec. (semi-automatic), 8 sec. (full-automatic)
Gate opening time0.2 seconds
DirectionSingle or bi-directional
IndicatorsLED for direction with arrow marks
ApplicationDesigned for the indoor or outdoor application. It is recommended to use cover for outdoor application
SPEED 
Passage Speed20~30 persons/min
MTBF>3 million operations
COMMUNICATION 
InterfaceRS485, TCP/IP (Optional)
GENERAL 
Ingress ProtectionIP 54
TemperatureIndoor    : -10℃—50℃
 Outdoor : -10℃—50℃
HumidityRelative ≤90% at zero condensation
Input interfaceDry contact signal or +12V level signal or DC12V pulse signal with a width of more than 100ms, driving current: > 10mA
CERTIFICATIONSCE, FCC, RoHS, WEEE

ORDERINGPRODUCT CODEDESCRIPTION 
 NU 1334 XETButterfly Shaped Waist Height Tripod Turnstile
  X : M (Manual),  : S( Semi Automatic), : A (Automatic),  
         
DOWNLOADS       
SPECIFICATIONSCERTIFICATIONSMANUALSWARRANTY 
Nundnet NU 1334 XETCE FCCULRoHSO & M  

Additional information

HOUSING

Nundnet NU 1334 XET uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.

FCC COMPLIANCE

Nundnet NU 1334 XET equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

OPTIONS

Available as Semi-Automatic & Fully Automatic

SIDE PANEL

Without side stainless steel panel

TOP