for sales  sales@nundnet.com & technical support technical@nundnet.com
Standalone two door access Controller for UHF RFID Long range reader

Controller for UHF RFID Long range reader NET7012SA

CODE: Nundnet NET 7012SA

Standalone two Door Controller, Nundnet NET 7012SA is a specially designed access controller compatible with UHF long range readers and other access control applications suitable for places where computer communication is not available hence standalone device is needed. NET7012SA have the capacity of 4000 users and does not need any software to connect as it is fully standalone. The unit supports Wiegand 26/ 34 protocol and automatically detects the same. An optional communication port of RS232 can be incorporated for firmware upgrade or other integrations. The unit is available as two options, DIN rail pack & electronic board only. An anti-passback feature is an option which can be incorporated on special request. All programming of cards is to be done manually.

FEATURES
Specially designed for location with no networks & computers
  • Generic PAC functions
  • Anti pass back feature
  • Standalone Operation
  • Fully programmable
  • No need of Computer or software
  • Wiegand 26/ 34 Interface
  • 4000 Users
  • IP 31 rated
  • Nundprox M, K, U compliant
  • CE, FCC, RoHS
  • DIN RAIL surface mount design/ PCB

Standalone two door controller for UHF RFID Long range reader, Bus turnstile etc.
COMPATIBILITYAccess Readers, UHF Long range readers
Nundprox U, M, K series
Turnstiles, Parking barriers, Traditional Access Controllers etc.
POWER SUPPLY
Voltage (input)8-15VDC ± 5%
Consumption (current)Standby mode 180mA
Operation mode 240mA
COMMUNICATION
Serial portsRS 232 (1 ~ 100Meters)
Reader portWiegand 26 /34,  Auto detection mode
CAPACITY
Users4000 users/ group
Programmable through readers
Programming with Master cards
Delete card per user or per group of users
ConfigurationWiegand mode (only Card)
& Nundnet Keypad + reader mode (card and PIN Code)
OPERATION MODE
Readers, Anti Passback
RELAYS
Two1 x Door forced alarm, 1 x Door open too long alarm
Time settings (seconds)Pulse 1-250 s / Latch mode
Push button control2
GENERAL
TemperatureOperation  0ºC ~ 50ºC
Storage      -15°C ~70°C
Humidity0 to 95% (non-condensing
IP ratingsIP 31
DimensionsPCB: 102 x 86 mm (L x H x W)
Weight~0.12 kg
DESCRIPTIONCATEGORYPRODUCT CODEDOWNLOAD
Standalone 2 Door ControllerStandaloneNET 7012SA Specifications User manual

Additional information

INTERFACE

Nundnet NET 7012SA is developed & designed for easy integration into existing digital & electronic management systems in the industry, viz.a.viz access controls, car parking & vehicle access control, retail & property management, ID access control for offices and private buildings, hand-free operation using Wiegand interface.

OPERATION

Nundnet NET 7012SA is standalone and independent of any software

ISO 18000-6C

It defines air interface parameters for tags operating within the frequency range of 860–960 MHz and allows for use of different frequencies in different regions from within this range. Nundnet NT 915 P offers frequency range of 902~ 928 MHz, 865 ~ 868 MHz, 922 ~ 928 MHz.

HOUSING

Nundnet NET 7012SA can either be available as electronic board or DIN rail

INTEGRATION

Nundnet NET 7012SA can be integrated with aby UHF long range reader or standard reader as long as readers are withe Wiegand port.

FCC COMPLIANCE

Nundnet NT 915P equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Products in same series…

Related products

TOP