Electric Bolt Lock NU 8271S

CODE: Nundnet NU 8271S

  • Electric bolt lock
  • Holding force 800Kg/ 1763.7lb (pounds)
  • Stainless steel throw
  • Polished housing, high grade aluminum alloy
  • Test cycles ~ 500000
  • Surge protection using Metal Oxide Varistor
  • Full protection for loading current
  • Temperature & current control
  • IP54 rated

TYPEFail safe electric bolt lock
MATERIAL
Throw typeStainless steel 16mm throw
Polished housing
Holding force800Kg/ 1763.7lb (pounds)
FaceplateHigh quality aluminum
METRICS
Dimensions LWH (mm)Size                             :  205 x 35 x 41
Armature plate        :  90 x 25 x 2
Bolt                             :  16 x 16
ELECTRICAL
Standby current110mA
Operating current900mA
Input voltageDC12V
Consumption12V/1A ±10%
Induction distance8mm
GENERAL
Signal
LED
Timer
Surge protectionUsing MoV (Metal Oxide Varistor)
Test cycles50000
MTCF>3 million operations
Ingress ProtectionIP 54
Storage Temperature-20° C ~ +65°C
Operating Temperature-20° C ~ +65°C
Surface temperature<21°C
Humidity90% RH
Weight720 grams (.72Kg)
CERTIFICATIONS
CE, FCC, RoHS, WEEE

ORDERINGSERIESDESCRIPTION
NU 8200 SeriesElectric Bolt Lock
SStandardTTimer
ESignalRIndicator
DOWNLOADS
SPECIFICATIONSCERTIFICATIONSMANUALDRAWINGWARRANTY
NU 8271SCEFCCRoHSManualDrawingsWarranty

Additional information

HOLDING FORCE

800Kg/ 1763.7lb (pounds)

HOUSING

Nundnet NU 8271S electric bolt lock uses Anodized aluminum housing that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.

FCC COMPLIANCE

Nundnet NU 8271S electric bolt lock, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

SURGE PROTECTION

Surge protection using Metal Oxide Varistor

SIGNAL

LED

TIMER

TOP