Standard Electric Strike Lock NU 8361SJ
CODE: Nundnet NU 8361SJ
- Electric strike lock fail safe
- Holding force 500 Kg/ 1102.31lb (pounds)
- Polished housing, high grade aluminum alloy
- Test cycles ~ 500000
- Surge protection using Metal Oxide Varistor
- Full protection for loading current
- Temperature & current control
- IP54 rated
TYPE | Standard fail safe electric strike lock |
MATERIAL | |
Material | Zinc alloy electroplated |
Holding force | 500Kg/ 1102.31lb (pounds) |
METRICS | |
Dimensions LWH (mm) | 150 x 39.5 x 33.5 |
ELECTRICAL | |
Operating current | 120mA/ 240mA |
Input voltage | DC12V ~240mA / 24V ~120mA (optional) |
GENERAL | |
Signal | NC ( Fail safe) |
LED | – |
Timer | – |
Surge protection | Using MoV (Metal Oxide Varistor) |
Test cycles | 1000000 |
MTCF | >3 million operations |
Ingress Protection | IP 54 |
Storage Temperature | -20° C ~ +65°C |
Operating Temperature | -20° C ~ +65°C |
Surface temperature | <21°C |
Humidity | 90% RH |
Weight | 400 grams (.4Kg) |
CERTIFICATIONS | |
CE, FCC, RoHS, WEEE |
ORDERING | SERIES | DESCRIPTION | ||||
NU 8300 Series | Electric Strike Lock | |||||
J | Fail safe | K | Fail secure | |||
E | Signal | R | Indicator | |||
DOWNLOADS | ||||||
SPECIFICATIONS | CERTIFICATIONS | MANUAL | DRAWING | WARRANTY | ||
NU 8361SJ | CE | FCC | RoHS | Manual | Drawings | Warranty |
Additional information
HOLDING FORCE | 500Kg/ 1102.31lb (pounds) |
---|---|
HOUSING | Nundnet NU 8361SJ fail safe electric strike lock uses Anodized aluminum housing that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C. |
FCC COMPLIANCE | Nundnet NU 8361SJ fail safe electric strike lock , this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. |
SURGE PROTECTION | Surge protection using Metal Oxide Varistor |
SIGNAL | — |
LED | — |
TIMER | — |