Flat Round Angle Tripod Turnstile NU 1331XFT

CODE: Nundnet NU 1331 XFT

MATERIAL
Housing Material	SUS 304 stainless steel steel outer body & arms
ELECTRICAL
Operating Voltage	AC220V/ 50Hertz ±10%, AC110V/ 60Hertz ±10% (Optional on basis of customization)
Motor	24V DC brush motor constructed with wound rotors and magnet stators
METRIC
Standard Size	L1500 x W280 x H980(mm)
Arm Length	500 ~ 550mm as per standard norms
OPERATION
Startup after Power (ON)	3 sec. (semi-automatic), 8 sec. (full-automatic)
Gate opening time	0.2 seconds
Direction	Single or bi-directional
Indicators	LED for direction with arrow marks
Application	Designed for the indoor or outdoor application. It is recommended to use cover for outdoor application
SPEED
Passage Speed	20~30 persons/min
MTCF	>3 million operations
COMMUNICATION
Interface	RS485, TCP/IP (Optional)
GENERAL
Ingress Protection	IP 54
Temperature	Indoor : -10℃—50℃
	Outdoor : -10℃—50℃
Humidity	Relative ≤90% at zero condensation
Input interface	Dry contact signal or +12V level signal or DC12V pulse signal with a width of more than 100ms, driving current: > 10mA
CERTIFICATIONS	CE, FCC, RoHS, WEEE

ORDERING	PRODUCT CODE		DESCRIPTION
	NU 1331 XFT		Flat Round Angle Tripod Turnstile
	X : S( Semi Automatic); A (Automatic),

DOWNLOADS
SPECIFICATIONS	CERTIFICATIONS				MANUALS	WARRANTY
Nundnet NU 1331 XFT	CE	FCC	UL	RoHS	O & M

Additional information

HOUSING	Nundnet NU 1331 XFT uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.
FCC COMPLIANCE	Nundnet NU 1331 XFT equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
OPTIONS	Available as Semi-Automatic & Fully Automatic
SIDE PANEL	Without side stainless steel panel