Full Height Turnstile NU 9020FH
CODE: Nundnet NU 9020 FH
- Semi Automatic Full Height Turnstile
- Steel thickness 1.5~3.0mm
- 304 SUS Stainless steel material /316 SUS (Optional)
- Single button press activation
- LED direction arrow plate
- Swipe card memory function
- Mechanism with shock absorption and anti-reverse
- Pass through timeout of 10 seconds after card swipe
- Re-use duration of same card user set from 1~60sec
- Power failure automatic opening
- Regain power automatic set operation
| MATERIAL | |
| Housing Material | SUS 304 stainless steel steel outer body, 316 grade stainless steel(Optional), Steel thickness 1.5~3.0mm |
| Options | – All Stainless Steel-All Painted – Main Body Painted, Arms Stainless Steel – Brushed: SS AISI 316 – Polished: SS AISI 304, SS AISI 316 – Powder coated: RAL |
| ELECTRICAL | |
| Operating Voltage | AC220±10% V/50 ±10% Hertz, AC110V±10% 50 ±10% Hertz(Optional on basis of customization) |
| Motor | 24V DC brush motor constructed with wound rotors and magnet stators |
| Infra Red Sensors | Customization |
| MECHANICAL | |
| Standard Size | 1400 x 1150 x 1250 (LxWxH)mm |
| Channel Width | 500 ~ 550mm as per standard norms |
| Customization available | |
| OPERATION | |
| Startup after Power (ON) | 6 seconds |
| Gate opening time | 0.2 seconds |
| Direction | free entry/exit, controlled entry/exit, no entry/exit, or any combination |
| Indicators | LED for direction with arrow marks |
| Application | Designed for the indoor or outdoor application. It is recommended to use cover for outdoor application |
| SPEED | |
| Passage Speed | 35~45 persons/min |
| MTCF | >5 million operations |
| COMMUNICATION | |
| Interface | RS485, TCP/IP (Optional) |
| GENERAL | |
| Ingress Protection | IP 55 |
| Temperature | Indoor : -10℃—50℃ |
| Outdoor : -10℃—50℃ | |
| Humidity | Relative ≤90% at zero condensation |
| Input interface | Dry contact signal or +12V level signal or DC12V pulse signal with a width of more than 100ms, driving current: > 10mA |
| CERTIFICATIONS | CE, FCC, RoHS, WEEE |
| ORDERING | PRODUCT CODE | DESCRIPTION | ||||||
| NU 9020 FH | Full Height Turnstile | |||||||
| X : : S( Semi Automatic), : A (Automatic), | ||||||||
| DOWNLOADS | ||||||||
| SPECIFICATIONS | CERTIFICATIONS | |||||||
| Nundnet NU 9020 FH | CE | FCC | ||||||
Additional information
| HOUSING | Nundnet NU 9020 FH uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C. |
|---|---|
| FCC COMPLIANCE | Nundnet NU 9020 FH equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. |
| OPTIONS | •Mounting Plates for the card readers |
