High Speed Gate NU 16177 FG

CODE: Nundnet NU 16177FG

  • High Speed Gate
  • Single Arm/ Double Arm
  • Steel thickness 1.5~3.0mm
  • 304 SUS Stainless steel material
  • Single button press activation
  • LED direction arrow plate
  • Swipe card memory function (Mifare/ NFC option)
  • Mechanism with shock absorption and anti-reverse
  • Pass through timeout of 10 seconds after card swipe
  • Re-use duration of same card user set from 1~60sec
  • Power failure automatic opening
  • Regain power automatic set operation

Housing materialStainless Steel
SUS 304 grade, SUS 316 (Optional)
Thickness1.2-1.5 mm, Can be customized on special
Flapsrequest Acrylic & PU /PUR (Polyurethane)
material, Organic units joined by carbamate
(urethane) links
Motor12V DC brush motor constructed with wound
rotors and magnet stators
Power Supply110V/60 Hertz, 220V/50Hertz ±10%
Consumption50W (Single)/ 100W (Double) in ideal conditions
Access controllerIn/ Out ( External device)
Access readerCan integrate with NUND 1.0 series of access
controllers & other brands
Nundnet NUND 1.0 Metal Reader series can be
embedded in the steel housing of turnstile based
on customer request.
Capacious card container150 cards (option)
Capacious card optionEM Marine, Mifare with NFC
Serial InterfaceRS 485 / 9600bps ( N,8,1) Optional
Ethernet PortTCP/IP, 10/100M Base T Module (optional)
Passage Speed30~35 persons/min
MTCF>3 million operations
Startup after Power (ON)3 sec. (semi-automatic), 6 sec. (full-automatic)
Gate opening time0.2 seconds
DirectionSingle or bi-directional
Drive motorDC 12V/ 24V (optional), Brushless
IndicatorsLED for direction with arrow marks
Infra Red Sensors3 (Knee, Waist) Standard Sensors, Customization
ApplicationDesigned for the indoor and for the outdoor
application special cover may be required.
Ingress ProtectionIP 41
Storage Temperature-25° C ~ +70° C
Operating Temperature-25° C ~ +70° C
Humidity90% RH
Weight120Kg (660mm), 130Kg (ADA compliant)
Overall dimensions(height x width x depth
Left side unit (mm)1052 x 1330 x 208
Right side unit (mm)1052 x 1330 x 208
one side unit (mm)1052 x 1330 x 510
Two side unit (mm)1052 x 1330 x 830
Control board (mm)107 х 107 х 25
Wing dimensions (mmStandard 600 / ADA compliant 900

NU 16177 FGHigh Speed Gate
X : L -Left module, R-Right module,  A : ADA Compliant
M66/M69Central module
Nundnet NU 16177FGCEFCCULRoHSO & M

Additional information


Nundnet NU 16177 FG uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.


Nundnet NU 16177 FG equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.


Available as Single Swing, Double Swing

ADA Compliance

DDA compliant wheelchair accessible Lanes is 900 – 940mm thereby allows passage for wheelchair users and those with other impairments or who are in need of assistance.