Glass barrier for turnstiles NUB1510

CODE: Nundnet NUB1510

NUB1510 Glass barrier enclosures for turnstiles and related applications are designed in accordance with the relevant parts of building regulations approved document K and BS 6180. And the glass panel must withstand static and impact loads as given in BS 6399-1.  The design of the glass barriers for turnstiles depends on the location and application, after proper risk assessment in most of the cases. Risk assessment will vary in content and depth of coverage, as there is no clear industry guidance. In general uses, tempered glass panel and stainless steel posts made of SUS304 steel.

Designed for indoor applicationL:  1500mm, H: 10000mm
Tempered glass panel 8mm/ 10mmSide posts/ Grounded clamps
SUS304 grade, SUS316 optionCustomisation based on project
CE Certified

PanelTempered glass (Toughened glass)
Dimensions, mm1500 x 1000
Thickness  8mm/ 10mm
Customised based on project requirements within industry standards
Holes2/3 each side (left & right), 3 on foundation base
Fence/ Holder/ RailingBrushed stainless steel
Post typeCircular, Square, Railing
MaterialSUS304 stainless steel, SUS316 stainless steel (optional)
Mounting base type1.5mm, 2.0 mm (optional)
TemperatureOperation:   -10°C ~ +65°C, Storage : -10°C ~ +65°C
Humidity75% at +15°C
CertificationsCE, RoHS, WEE

Nundnet NUB1510CEWEERoHSClamps/ PostsDimensions(mm)


Additional information


Nundnet NUB1510 uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.


Uses tempered/ toughened glass of thickenss 8mm/ 10mm/ 12mm based on project requirements


Available with side clips or based mounted clamps

Environmental Compliance

As per industry standards