Speed Gate NU 16040 FG

  • Standard Speed Gate
  • Single Arm/ Double Arm
  • Steel thickness 1.5~3.0mm
  • 304 SUS Stainless steel material
  • Single button press activation
  • LED direction arrow plate
  • Swipe card memory function
  • Mechanism with shock absorption and anti-reverse
  • Pass through timeout of 10 seconds after card swipe
  • Re-use duration of same card user set from 1~60sec
  • Power failure automatic opening
  • Regain power automatic set operation
PRODUCT CODE: Nundnet NU 16040 FG Category:


Housing Material SUS 304 stainless steel steel outer body, 316 grade stainless steel(Optional),  Steel thickness 1.5~3.0mm
Swing Arms Acrylic & PU /PUR (Polyurethane) material/ Organic units joined by carbamate (urethane) links
Operating Voltage AC220±10% V/50 ±10% Hertz, AC110V±10% 50 ±10% Hertz(Optional on basis of customization)
Motor 24V DC brush motor constructed with wound rotors and magnet stators
Infra Red Sensors 3 (Knee, Waist) Standard Sensors, Customization option
Standard Size 1600 x 280 x 1000 (LxWxH)mm,  1500 x 280 x 1000 (LxWxH)mm
Channel Width 500 ~ 550mm as per standard norms
  900mm ADA Compliance
Startup after Power (ON) 6 seconds
Gate opening time 0.2 seconds
Direction Single or bi-directional
Indicators LED for direction with arrow marks
Application Designed for the indoor or outdoor application. It is recommended to use cover for outdoor application
Passage Speed 35~45 persons/min
MTCF >5 million operations
Interface RS485, TCP/IP (Optional)
Ingress Protection IP 54
Temperature Indoor    : -10℃—50℃
  Outdoor : -10℃—50℃
Humidity Relative ≤90% at zero condensation
Input interface Dry contact signal or +12V level signal or DC12V pulse signal with a width of more than 100ms, driving current: > 10mA

Nundnet NU 16040 FGX  X : S  Single Mechanism Speed Gate
  X : D  Double Mechanism Speed Gate

Additional information


Nundnet NU 16040 FG uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.


Nundnet NU 16040 FG equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.


Available as Single Swing, Double Swing

ADA Compliance

DDA compliant wheelchair accessible Lanes is 900 – 940mm thereby allows passage for wheelchair users and those with other impairments or who are in need of assistance.