Swing Barrier NU 6042 SB

CODE: Nundnet NU 6042 SB X

  • Standard Swing Barrier
  • Single Swing/ Double Swing
  • Steel thickness 1.5~3.0mm
  • 304 SUS Stainless steel material
  • Single button press activation
  • LED direction arrow plate
  • Swipe card memory function
  • Mechanism with shock absorption and anti-reverse
  • Pass through timeout of 10 seconds after card swipe
  • Re-use duration of same card user set from 1~60sec
  • Power failure automatic opening
  • Regain power automatic set operation

MATERIAL
Housing MaterialSUS 304 stainless steel steel outer body, 316 grade stainless steel(Optional),  Steel thickness 1.5~3.0mm
Swing ArmsSUS 304 stainless steel steel, 316 grade stainless steel (Optional),  Steel thickness 1.5~3.0mm, Acrylic & PU /PUR (Polyurethane) material/ Organic units joined by carbamate (urethane) links (Optional)
ELECTRICAL
Operating VoltageAC220±10% V/50 ±10% Hertz, AC110V±10% 50 ±10% Hertz(Optional on basis of customization)
Motor24V DC brush motor constructed with wound rotors and magnet stators
Infra Red Sensors3 (Knee, Waist) Standard Sensors, Customization option
MECHANICAL
Standard Size1200 x 280 x 1000 (LxWxH)mm,                                                   1400 x 280 x 1000 (LxWxH)mm
Channel Width500 ~ 550mm as per standard norms
900mm ADA Compliance
OPERATION
Startup after Power (ON)6 seconds
Gate opening time0.2 seconds
DirectionSingle or bi-directional
IndicatorsLED for direction with arrow marks
ApplicationDesigned for the indoor or outdoor application. It is recommended to use cover for outdoor application
SPEED
Passage Speed35~45 persons/min
MTCF>3 million operations
COMMUNICATION
InterfaceRS485, TCP/IP (Optional)
GENERAL
Ingress ProtectionIP 54
TemperatureIndoor    : -10℃—50℃
Outdoor : -10℃—50℃
HumidityRelative ≤90% at zero condensation
Input interfaceDry contact signal or +12V level signal or DC12V pulse signal with a width of more than 100ms, driving current: > 10mA
CERTIFICATIONSCE, FCC, RoHS, WEEE

 


ORDERINGPRODUCT CODEDESCRIPTION
NU6042SBXStandard Swing Gate
X: S –  Single Swing Gate , D – Double Swing Gate ,
DOWNLOADS
SPECIFICATIONSCERTIFICATIONSMANUALSWARRANTY
Nundnet NU 6042SBCEFCCULRoHSO & M

Additional information

HOUSING

Nundnet NU 6042 SB uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.

FCC COMPLIANCE

Nundnet NU 6042 SB equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

OPTIONS

Available as Single Swing, Double Swing

ADA Compliance

DDA compliant wheelchair accessible Lanes is 900 – 940mm thereby allows passage for wheelchair users and those with other impairments or who are in need of assistance.

TOP