Tripod Turnstile NU 1323 WM

  • Wall mount type turnstile
  • 304 SUS Stainless steel material
  • Single button press activation
  • LED direction arrow plate
  • Swipe card memory function
  • Mechanism with shock absorption and anti-reverse
  • Pass through timeout of 10 seconds after card swipe
  • Re-use duration of same card user set from 1~60sec
  • Power failure automatic opening
  • Regain power automatic set operation
PRODUCT CODE: Nundnet NU 1323 WM Category:

Description

MATERIAL
Housing Material SUS 304 stainless steel steel outer body & arms
ELECTRICAL
Operating Voltage AC220V /50Hertz ±10%  ,AC110V/ 60Hertz ±10% (Optional on basis of customization)
Motor 24V DC brush motor constructed with wound rotors and magnet stators
MECHANICAL
Standard Size L450 x W280 x H220(mm)
Arm Length 500 ~ 550mm as per standard norms
OPERATION
Startup after Power (ON) 3 sec. (semi-automatic), 8 sec. (full-automatic)
Gate opening time 0.2 seconds
Direction Single or bi-directional
Indicators LED for direction with arrow marks
Application Designed for the indoor or outdoor application. It is recommended to use cover for outdoor application
SPEED
Passage Speed 20~30 persons/min
MTBF >3 million operations
COMMUNICATION
Interface RS485, TCP/IP (Optional)
GENERAL
Ingress Protection IP 54
Temperature Indoor    : -10℃—50℃
Outdoor : -10℃—50℃
Humidity Relative ≤90% at zero condensation
Input interface Dry contact signal or +12V level signal or DC12V pulse signal with a width of more than 100ms, driving current: > 10mA
CERTIFICATIONS CE, FCC, RoHS, WEEE

ORDERING PRODUCT CODE DESCRIPTION
NU 1323 WM Waist Height Wall Mount Tripod Turnstile
X : M (Manual),  : S( Semi Automatic), : A (Automatic),
DOWNLOADS
SPECIFICATIONS CERTIFICATIONS MANUALS WARRANTY
Nundnet NU 1323WM CE FCC UL RoHS O & M

Additional information

HOUSING

Nundnet NU 1323 WM uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.

FCC COMPLIANCE

NU 1323 WM equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

OPTIONS

Available as Manual, Semi-Automatic & Fully Automatic

TOP