Tripod turnstile with drop arm function motorised

Tripod Turnstile NU 1335XHT

CODE: Nundnet NU 1335XHT

MATERIAL
Housing Material	SUS 304 stainless steel steel outer body & arms, RAL (optional)
ELECTRICAL
Operating Voltage	AC220V/ 50Hertz ±10%, AC110V/ 60Hertz ±10% (Optional on basis of customization)
Motor	Motorised with fail safe mode, Drop arm function
METRICS
Standard Size(mm)	T: 884x775x995 U: 1084x775x1060 R: 755x530x1098 (optional)
Arm Length (mm)	500 ~ 550 as per standard norms
OPERATION
Startup after Power (ON)	3 sec. (semi-automatic), 8 sec. (full-automatic)
Gate opening time	0.2 seconds
Direction	Single or bi-directional
Indicators	LED for direction with arrow marks
Application	Designed for the indoor or outdoor application. It is recommended to use cover for outdoor application
SPEED
Passage Speed	30~40 persons/min
MTCF	>3 million operations
COMMUNICATION
Interface	RS485, TCP/IP (Optional), Voltage free contact
GENERAL
Ingress Protection	IP 44
Temperature	Indoor : -15℃~ 60℃
	Outdoor : -15℃ ~ 60℃
Humidity	Relative ≤90% at zero condensation
Input interface	Dry contact signal or +12V level signal or DC12V pulse signal with a width of more than 100ms, driving current: > 10mA
CERTIFICATIONS	CE, RoHS, WEEE

ORDERING		PRODUCT CODE		DESCRIPTION
		NU1335 XHT		Flat circular tripod waist height tripod turnstile with drop arm
	Dimensions (WDH)mm	T: 884x775x995 U: 1084x775x1060 R: 755x530x1098 (customised)

DOWNLOADS
SPECIFICATIONS		CERTIFICATIONS			MANUALS	WARRANTY	REMARKS
Nundnet NU 1335 XHT		CE	RoHS	WEE	Operation	2 Years	V1.1

Additional information

HOUSING	Nundnet NU 1335 XHT uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.
FCC COMPLIANCE	(Optional) Nundnet NU 1335 XHT equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
OPTIONS	Available as Semi-Automatic & Fully Automatic
SIDE PANEL	Without side stainless steel panel