Turnstile for Bus NU 1323 WM

CODE: Nundnet NU 1323 WM

Turnstile for Bus, wall mount design, can be fixed on any available space, a wall or single pillar or double,  well carved & designed for paths that encounter heavy rush every day. Robust in construction, equipped with LED direction indicators with a well deserved space for RFID readers & the control board with RS control protocol and dry contacts for system integration. 

FEATURES
Easy mount designDrop arm function
Expandable back plateIP 54 Ingress protection rating
Steel SUS 304/ SUS316 (option)Self test on power on
RAL Powder coating optionDC 12V/24V – 5A
LED direction indicators110~220V 50/60Hz. AC
RS 232, RS 485, TCP/IP OptionRFID Card option
Click to download brochure turnstile for bus 

Description

TYPE
Wall mount turnstile for bus
MATERIAL
Housing MaterialSUS 304 grade steel
SUS 316 grade steel (Option)
RAL Coated
ELECTRICAL
Operating VoltageAC220V /50Hertz ±10%, AC110V/ 60Hertz ±10%
DC 12V/ 5A, DC 24V/ 2.5A
Motor24V DC brush motor constructed with wound rotors and magnet stators
DC12V electrical level signal, >10ms, or DC12V impulse signal driving current, >10mA
MECHANICAL
Standard SizeL450 x W280 x H220(mm)
Arm Length490 ~ 550mm as per standard norms
OPERATION
Startup after Power (ON)3 sec. (semi-automatic)
Gate opening time0.2 seconds
DirectionSingle or bi-directional
IndicatorsLED for direction with arrow marks
ApplicationDesigned for the indoor or outdoor application. It is recommended to use cover for outdoor application
Power failureArms down
ACCESS CONTROL
Space for access reader
LF 125KHz, HF 13.56MHz  or any device
SPEED
Passage Speed30~35 persons/min
MTCF>3 million operations
COMMUNICATION
InterfaceRS232;  RS485 (option), TCP/IP (Optional)
GENERAL
Ingress ProtectionIP 54
TemperatureIndoor    : -10℃—50℃
Outdoor : -10℃—50℃
HumidityRelative ≤90% at zero condensation
Input interfaceDry contact signal or +12V level signal or DC12V pulse signal with a width of more than 100ms, driving current: > 10mA
WeightNet: 50Kg, Gross: 56Kg
CERTIFICATIONSCE, RoHS, WEEE
OPTIONS
1.  Diffuse electrical sensor  NUDEC 13
2.  Access control reader NET1, NET2, NET3 series or third party device
3.  RFID card/ coin collector NUREC 13
4.  People counter NUPEC 13
5.  Built-in access controller NUBAC 13
6.  Remote control NUIRC 13

DOWNLOADS
DESCRIPTIONCODESPECIFICATIONSDRAWINGS CERTIFICATIONS MANUALWARRANTY
Turnstile for busNU 1323 WMTurnstile for busElectricalCE, FCC, RoHSUser2 Years
SSemi AutomaticMechanical Operation
AFully AutomaticIntegrationElectric
Mechanical

 

Additional information

HOUSING

Nundnet NU 1323 WM uses 304 stainless steel that has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60°C. It is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.

FCC COMPLIANCE

NU 1323 WM equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

OPTIONS

Available as Manual, Semi-Automatic & Fully Automatic

TOP