2 Door Access Controller

CODE: NundNet NDX 1032 IP

  • 15,000 active users
  • 30,000 events each controller
  • Unlimited events per system
  • Built-in TCP/IP Port for communication
  • Wiegand Interface (8 ~ 128 bit wide)
  • Programmable Wiegand interface based in bits
  • Anti-Pass back, General and Timed
  • Additional features like Man-Trap
  • Fire Alarm Integration
  • Scenarios creation viz-a-viz Zone Programming,
  • Muster (Critical Area) report, Fire Alarm.
  • Featured Integrated door contacts, exit button inputs and free I/O
  • DIN Rail design

Description

CONTROLLER 
TypeDIN Type Network based with built-in TCP/IP Port
COMMUNICATION
PortsTCP/IP, RS 485
I/O ExpansionRS 485 Port communication unto 1200 Meters
ExpandabilityUnlimited Controllers
Addressing per controllerEach Controller have unique ID
READERS & DOORS
ExpandabilityUnlimited
Reader CompatibilityWiegand Readers 8~128 bits width
Number2 with Anti Pass Back
INPUTS
Exit Button2 ( 1 each Door)
Door Contact2 (1 each Door)
Programmable inputs2 ( Opto Paired)
OUTPUTS
Door Relays2 ( 2 x 10A)
Programmable Relays2 ( 2 x 10A)
CARDS & DATABASE
Users15000
Events30000
Time Zones24
User GroupsUnlimited
Bank Holidays32
LED’S
Status LED14 LED’s ((Power, system run, Ethernet, loop, downstream, readers, relay status))
MEMORY
InternalYes with time and date back-up
SOFTWARE
Management SoftwareNUND Soft 1.0 (Free)
FirmwareUpgrade using RS 485 or TCP/IP
POWER
Battery Backup12V DC 7AH Battery
Power Supply12V DC
DIN Dimensions
PCB  Rail (mm)157 x 87
DIN Rail (mm):161 x 91 x 62

Additional information

USERS & RECORDS

NUNDNET NDX 1032 IP door controller is designed and developed to offer several types & options of access control. The units supports up to 15,000 users with not less than 30,000 events per controller unit. It Connects two readers for two door application with single controller. The various features incorporated are 2 door contacts, 2 Exit inputs, 2 free inputs and 2 free outputs for alarms and other peripheral actions.

COMMUNICATION

Using the patented distributed intelligence technology, the built-in TCP/IP built-in module and RS485 port takes control for all the communication and correspondence with support for unlimited controllers per system. The system can be set up using TCP/IP set-up and/or daisy chained on RS485 (up to 32 controllers on one bus). Each controller is standalone and have has its own memory chip hence averts any failure.

INTEGRATION

NUNDNET NDX 1032 IP is designed to be compatible with Wiegand Interface (26 to 128bits) and is programmable. The availability of the configurable free outputs & free inputs, exit inputs and door sensors makes system suitable for easy integration .

LIFT MODE

NUNDNET NDX 1032 IP Controller can be put in Lift Mode for controlling the floor access and permitting the use of elevator only by authorized cardholder. One I/O Board NUX 486 enables control of 8 floors. Max. of 4 NUX 486 boards can be used per Nundnet NU 1022 IP (32 floors). Through the Access levels, the cardholder can be allowed to access certain floors even in certain time zones.

DIN RAIL STRUCTURE

DIN rail design enable the systems to be used very easily, just plug & play type. It allows easy Installation at any mode.

Size for PCB DIN rail (mm) 157 x 87
Size for DIN rail (mm) 161 x 91 x 62

TOP