2 Door Access Controller
CODE: Nundnet NUS 1022 IP
- 15,000 active users
- 30,000 events each controller
- Unlimited events per system
- Built-in TCP/IP Port for communication
- Wiegand Interface (8 ~ 128 bit wide)
- Programmable Wiegand interface based in bits
- Anti-Pass back, General and Timed
- Additional features like Man-Trap
- Fire Alarm Integration
- Scenarios creation viz-a-viz Zone Programming,
- Muster (Critical Area) report, Fire Alarm.
- Featured Integrated door contacts, exit button inputs and free I/O
|Type||Network based with built-in TCP/IP Port|
|Ports||TCP/IP, RS 485|
|I/O Expansion||RS 485 Port communication unto 1200 Meters|
|Addressing per controller||Each Controller have unique ID|
|READERS & DOORS|
|Reader Compatibility||Wiegand Readers 8~128 bits width|
|Number||2 with Anti Pass Back|
|Exit Button||2 ( 1 each Door)|
|Door Contact||2 (1 each Door)|
|Programmable inputs||2 ( Opto Paired)|
|Door Relays||2 ( 2 x 10A)|
|Programmable Relays||2 ( 2 x 10A)|
|CARDS & DATABASE|
|Status LED||14 LED’s ((Power, system run, Ethernet, loop, downstream, readers, relay status))|
|Internal||Yes with time and date back-up|
|Management Software||NUND Soft 1.0 (Free)|
|Firmware||Upgrade using RS 485 or TCP/IP|
|Battery Backup||12V DC 7AH Battery|
|Power Supply||12V DC|
|USERS & RECORDS|
Nundnet NU 1022 IP door controller is designed and developed to offer several types & options of access control. The units supports up to 15,000 users with not less than 30,000 events per controller unit. It Connects two readers for two door application with single controller. The various features incorporated are 2 door contacts, 2 Exit inputs, 2 free inputs and 2 free outputs for alarms and other peripheral actions.
Using the patented distributed intelligence technology, the built-in TCP/IP built-in module and RS485 port takes control for all the communication and correspondence with support for unlimited controllers per system. The system can be set up using TCP/IP set-up and/or daisy chained on RS485 (up to 32 controllers on one bus). Each controller is standalone and have has its own memory chip hence averts any failure.
Nundnet NU 1022 IP is designed to be compatible with Wiegand Interface (26 to 128bits) and is programmable. The availability of the configurable free outputs & free inputs, exit inputs and door sensors makes system suitable for easy integration .
Nundnet NU 1022 IP Controller can be put in Lift Mode for controlling the floor access and permitting the use of elevator only by authorized cardholder. One I/O Board NUX 486 enables control of 8 floors. Max. of 4 NUX 486 boards can be used per Nundnet NU 1022 IP (32 floors). Through the Access levels, the cardholder can be allowed to access certain floors even in certain time zones.