Two Door Standalone controller NET7012SB

CODE: Nundnet NET 7012SB

Nundnet NET 7012SB, is a standalone two door access control, designed for locations with no computer & software setup. Very stable and efficient unit to provide great security to remote sites. The cards are added & deleted using generic master add and subtract procedure. Being totally standalone device, the unit can be integrated with UHF long range readers, turnstile based access controls at remote site with support of solar operated power supplies. The availability of tow relay sections lets the system board to be connected to the two readers with defacto Wiegand protocol so that perfect entry exit can be maintained.

Nundnet NET7012SB has the user capacity of 2000, and supports defacto protocol Wiegand 26 ~37 bits auto detection. The delay output is set at default of 5 seconds with Pulse 1 -99seconds adjustable.

Standard standalone two door controller 
Two door controller2100 users
Standalone OperationPIN. Card, PIN/ Card
No need of Computer or softwareFully programmable
Generic PAC functionsWiegand 26~37 Interface
Nundprox M, K, U compliantIP31 rated
Data transferCE, FCC, RoHS

Two door standalone access control
COMPATIBILITY
Nundprox U, M, K series
Turnstiles, Parking barriers, Traditional Access Controllers etc.
POWER SUPPLY
Voltage (input)9-24VDC ± 5%
Consumption (current)Standby mode < 30mA
Operation mode < 100mA
Lock output load(max)10A
COMMUNICATION
Reader input portWiegand 26 ~37 bits auto detection
Reader output portWiegand 26 ~37 bits to transfer the data
ALARM
Input, output
CAPACITY
Users2100 ( Standard + Zone)
Zone 1 : 2000 users, Zone 2 : 100 users
Programmable through readers
Programming with Master cards
Delete card per user or per group of users
ConfigurationCard, PIN/Card, Multiple PINs/ Cards
& Nundnet Keypad + reader mode (card and PIN Code)
OPERATION MODE
Readers 4bit, 8bits (ASCII), 10bits virtual number outputs
RELAYS
Two2 x (NO, NC, Common)
Time settings (seconds)Pulse 1 -99sec, 5sec(default)
GENERAL
TemperatureOperation                       0ºC ~ 50ºC
Storage                           -15°C ~70°C
Humidity0 to 95% (non-condensing
IP ratingsIP31
DimensionsLxHxW – PCB: 100 x 86 x 26mm/ Packing : 100 x 105 x 48mm
Weight~110gram/ 180gram
CERTIFICATIONS
 FCC Class A (US), ICES-003 Class A (Canada),
CE Mark EN 301 489-3 EN55022 EN50130-4 (EU)
C-Tick AS/ NZs CISPR 22 (Australia & New Zeeland), Korea (KCC)
RoHS, Administrative Measure on the Control of Pollution Caused by Electronic Information Products, WEEE
WARRANTY 
Warrantied against defects in materials and workmanship for 12/24 months (please visit https://nundnet.com/warranty)

DESCRIPTIONPRODUCT CODEDOWNLOADWARRANTYOPERATION
Standalone 2 Door ControllerNET7012SBSpecifications 2/5 YearsUser manual

Additional information

INTERFACE

Nundnet NET 7012SB is developed & designed for easy integration into existing digital & electronic management systems in the industry, viz.a.viz access controls, car parking & vehicle access control, retail & property management, ID access control for offices and private buildings, hand-free operation using Wiegand interface.

OPERATION

Nundnet NET 7012SB is standalone and independent of any software

ISO 18000-6C

It defines air interface parameters for tags operating within the frequency range of 860–960 MHz and allows for use of different frequencies in different regions from within this range. Nundnet NT 915 P offers frequency range of 902~ 928 MHz, 865 ~ 868 MHz, 922 ~ 928 MHz.

HOUSING

Nundnet NET 7012SB can either be available as electronic board or surface mount

INTEGRATION

Nundnet NET 7012SB can be integrated with aby UHF long range reader or standard reader as long as readers are with Wiegand port.

FCC COMPLIANCE

Nundnet NT 915P equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This device is designed to provide the
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Products in same series…

TOP